vibration resistant structure, 135 gvd series ? structure of higher vibration resistance by gpd series (acceleration 392m/s 2 , 40g) ? guaranteed short time at 150 ? designed for electric power steering and ecu (include engine control, direct fuel injection) etc. ? rated voltage range : 25 to 100v, capacitance range : 510 to 8,200 f ? solvent resistant type ? rohs compliant ? aec-q200 compliant : please contact chemi-con for more details, test data, information. specifications items characteristics category temperature range -40 to +135 rated voltage range 25 to 100v dc capacitance tolerance 20% (m) (at 20 , 120hz) leakage current i=0.03cv or 4a, whichever is greater. where, i : max. leakage current (a), c : nominal capacitance (f), v : rated voltage (v) (at 20 , 1 minute) dissipation factor (tan ) rated voltage (v dc ) 25v 35v 50v 63v 80v 100v tan (max.) 0.14 0.12 0.10 0.10 0.08 0.08 when nominal capacitance exceeds 1,000f, add 0.02 to the value above for each 1,000f increase. (at 20 , 120hz) low temperature characteristics (max. impedance ratio) rated voltage (v dc ) 25v 35v 50v 63v 80v 100v z(-25 )/z(+20 ) 2 2 2 2 2 2 z(-40 )/z(+20 ) 4 4 4 4 4 4 (at 120hz) endurance 1 the following speci?cations shall be satis?ed when the capacitors are restored to 20 after subjected to dc voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the speci?ed period of time at 125 or 135 . time 125 25 to 100v dc 3,000hours 135 25 to 50v dc 3,000hours 63 to 100v dc 2,000hours capacitance change Q 30% of the initial value d.f. (tan ) Q 300% of the initial speci?ed value leakage current Q the initial speci?ed value endurance 2 the following speci?cations shall be satis?ed when the capacitors are restored to 20 after the test condition that the rated voltage is applied for 100 hours at 150 and dc voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the speci?ed period of time at 125 or 135 . time 125 25 to 100v dc 2,500hours 135 25 to 50v dc 2,500hours 63 to 100v dc 1,500hours capacitance change Q 30% of the initial value d.f. (tan ) Q 300% of the initial speci?ed value leakage current Q the initial speci?ed value shelf life the following speci?cations shall be satis?ed when the capacitors are restored to 20 after exposing them for 1,000 hours at 125 without voltage applied. before the measurement, the capacitor shall be preconditioned by applying voltage according to item 4.1 of jis c 5101-4. capacitance change Q 30% of the initial value d.f. (tan ) Q 300% of the initial speci?ed value leakage current Q the initial speci?ed value vibration the following speci?cations shall be satis?ed when the capacitors are restored to 20 after subjected to vibration test (vibration pro?le shown below) at room temperature (15 to 35 ). capacitance change Q 5 of the initial value d.f. (tan ) Q the initial speci?ed value leakage current Q the initial speci?ed value vibration pro?le vibration frequency range 10 to 2,000hz amplitude or acceleration 1.5mm peak to peak or 392m/s 2 (40g), whichever is the less severe sweep rate 10 to 2,000 to 10hz 0.5 octave/minute direction and period of motion 2 hours in each of 3 mutually perpendicular directions (total of 6hours) fixation fix main body and lead teminal using a ?xture tool, please contact us for detail. dimensions [mm] vent f 0.5 d d f d' l' 18 0.8 7.5 d+0.5max. l+1.5max. gas escape end seal terminal code : e d l' d' 15min. 4min. coated case * please contact us about lead formings and mounting methods. vibration resistance gvd gpd p219 222 product specifications in this catalog are subject to change without notice.request our product specifications before purchase and/or use. please use our products based on the information c ontained in this catalog and product specifications. cat. no. e1001q miniature aluminum electrolytic capacitors
gvd series part numbering system please ref er to "product code guide (r adial lead type)" supplement code size code capacitance tolerance code capacitance code (ex. 680 f:681, 8,200 f:822) lead formingtaping code terminal code voltage code (ex. 25v:250, 50v:500) series code category e g v d a a a e a a a a a a a a h m 8 1 15 16 17 14 18 11 12 13 5 6 7 2 3 4 9 10 standard ratings wv (v dc ) cap (f) case size d l(mm) esr (
max/100khz) rated ripple current (marms/100khz) part no. 20 ? -40 ? 125 ? 135 ? 25 6,200 18 30 0.023 0.19 5,380 3,330 egvd250e 622mm30h 8,200 18 35.5 0.019 0.13 6,110 3,750 egvd250e 822mmp1h 35 3,600 18 30 0.023 0.19 5,380 3,330 egvd350e 362mm30h 4,700 18 35.5 0.019 0.13 6,110 3,750 egvd350e 472mmp1h 50 2,000 18 30 0.029 0.26 5,050 2,910 egvd500e 202mm30h 2,400 18 35.5 0.024 0.20 5,760 3,330 egvd500e 242mmp1h 63 1,300 18 30 0.029 0.18 3,930 3,100 egvd630e 132mm30h 1,800 18 35.5 0.024 0.14 4,920 3,520 egvd630e 182mmp1h 80 820 18 30 0.029 0.18 3,930 3,100 egvd800e 821mm30h 1,200 18 35.5 0.024 0.14 4,920 3,520 egvd800e 122mmp1h 100 510 18 30 0.038 0.25 3,800 2,830 egvd101e 511mm30h 680 18 35.5 0.030 0.19 4,550 3,210 egvd101e 681mmp1h : enter the appropriate lead forming or taping code. rated ripple current multipliers ? frequency multipliers frequency(hz) capacitance(f) 120 1k 10k 100k 510 0.50 0.85 0.94 1.00 680 to 2,000 0.60 0.87 0.95 1.00 2,400 to 3,600 0.75 0.90 0.95 1.00 4,700 to 8,200 0.85 0.95 0.98 1.00 please contact us for lifetime estimation. vibration resistant structure, 135 223 product specifications in this catalog are subject to change without notice.request our product specifications before purchase and/or use. please use our products based on the information contained in this catalog and product specifications. cat. no. e1001q miniature aluminum electrolytic capacitors
|
